Content for comparison
PA6G+oil - cast polyamide 6 with oil
This internally lubricated cast PA 6 is self-lubricating in the real meaning of the word. PA6G+oil developed for unlubricated, highly loaded and slow moving parts applications, yields a considerable enlargement of the application opportunities compared to standard cast PA6G. It offers a reduced coefficient of friction (up to 50% lower), considerably increasing the pressure-velocity capabilities, and a vastly improved wear resistance (up to 10 times better).
- Drive element
- Guide rails
- Sliding profiles, slide bearings, slide rails
- Guide and track rollers
- Deflection pulleys
- High mechanical strength, stiffness, hardness and toughness
- Good fatigue resistance
- High mechanical damping ability
- Good sliding properties
- Excellent wear resistance
- Good electrical insulating properties
- Good resistance to high energy radiation (gamma- and X-rays)
- Good machinability
Engineering plastics and their products can be ordered from TechPlasty. Materials in the same group from different manufacturers are not always directly interchangeable because they may not all have the same technical parameters. Our technical consultants, who have many years of experience in the field of engineering plastics, will be pleased to advise you on the differences in the individual materials, especially in the boundary conditions. Detailed technical data of individual manufacturers' materials can be found in their data sheets.
Some materials trade names are protected trademarks..
Oilamid, Linnotam Glide is a registered trademark of Licharz; Murlubric is a registered trademark of Murtfeldt; Ertalon® LFX is a registered trademark of Quadrant;
All other trademarks or registered trademarks are the property of their respective owners.
