Content for comparison
Duratron® PAI - polyamidimid
Duratron PAI is the highest performing, melt processable plastic. It has superior resistance to elevated temperatures. It is capable of performing under severe stress conditions at continuous temperatures to 260°C. Parts machined from Duratron stock shapes provide greater compressive strength and higher impact resistance than most advanced engineering plastics.
Duratron PAI's extremely low coefficient of linear thermal expansion and high creep resistance deliver excellent dimensional stability over its entire service range. Duratron PAI is an amorphous material with a Tg (glass transition temperature) of 280°C.
For large shapes or custom geometries like tubular bar, compression molded Duratron PAI shapes offer designers the greatest economy and flexibility. Another benefit of selecting a compression molded grade is that resins are cured, or "imidized" prior to molding which eliminates the need to post-cure shapes or parts fabricated from compression molded shapes.
Color ocher-yellow, black.
- High Temperature Electrical Connectors
- low expansion rate and excellent wear resistance enable manufacturers to increase bearing speeds and extend part life
- extraordinary compressive strength and abrasion resistance permit higher production rates, longer part life, and increased support of aluminum cans during printing
- Maintains strength and stiffness to 260°C
- Minimal expansion rate to 260°C
- Excellent wear resistance in bearing grades
- Able to endure harsh thermal, chemical and stress conditions
Engineering plastics and their products can be ordered from TechPlasty. Materials in the same group from different manufacturers are not always directly interchangeable because they may not all have the same technical parameters. Our technical consultants, who have many years of experience in the field of engineering plastics, will be pleased to advise you on the differences in the individual materials, especially in the boundary conditions. Detailed technical data of individual manufacturers' materials can be found in their data sheets.
Some materials trade names are protected trademarks.
Torlon® PAI, Duratron® PAI is a registered trademark of Quadrant;
All other trademarks or registered trademarks are the property of their respective owners.
